All
QUICKSHOP TRACKbox TB2 Bundle - ArmadaGPS Approved Hardware Including OBDII Install Cable PLUS Hardwire Cable
$295.00
The TRACKbox™ TB2 4G CAT M1 is Sensium's flagship Vehicle Tracking device.
The TB2 gathers data from your moving vehicle to provide information concerning its location, speed and distance travelled. This makes it an invaluable tool for fleet management and vehicle security. In addition, it can be easily installed and augmented with optional accessories.
Two bundled cables are supplied with the TRACKbox TB2. A Standard Hardwire Cable is also included plus an additional OBDII Pass-Through cable which allows two products to be easily simultaneously plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network). The OBDII pass-through gives you the ability to connect two products, such as a trackBOX TB2, plus another product such as a diagnostic scan tool.
Simply connect to the vehicle OBDII port for a complete installation.
Coupled with the ArmadaGPS monitoring service (AU$26.00 per month, per device, one-month minimum term).
Note the TB2 is only functional when paired with the ArmadaGPS monitoring service. Upon purchasing this product you will be personally contacted regarding your ArmadaGPS account.
QUESTIONS? CALL US NOW ON 1800 764 824
SAFETY AND ELECTRICAL APPROVALS 
The Regulatory Compliance Mark (RCM) indicates that the products are compliant with the Australia and New Zealand radio-communications and Electro Magnetic Compatibility (ENC) standards. These are the standards needed to ensure the safety of products and that they are fit for their intended use, protect the radio spectrum, minimise interference and allow effective use of radiocommunications services.
SPECIFICATIONS:
Network - 4G CAT M1
Size - 92 x 55 x 25mm
Weight - 78g
Waterproof - No
Backup Battery - 3.7V 1250mAh
Operating Voltage - 6 ~ 42V DC
Ignition State Sense - Yes
TRACKBOX TB2 GPS VEHICLE TRACKING + DRIVER ID BUNDLE - SAVE $100! ARMADAGPS APPROVED HARDWARE
Free
The TRACKbox™ TB2 4G CAT M1 is Sensium's premium Vehicle Tracking hardware.
Simply connect to the vehicle OBDII port for a complete installation, or a standard (3 wire) installation (power/earth/ignition sense) to monitor ignition on/off, engine hours, odometer and location.
The TB2 gathers data from your moving vehicle to provide information concerning its location, speed and distance travelled. This makes it an invaluable tool for fleet management and vehicle security. In addition, it can be easily installed and augmented with optional accessories.
Coupled with the ArmadaGPS monitoring service (AU$26.00 per month, per device, one-month minimum term).
Note the TB2 is only functional when paired with the ArmadaGPS monitoring service. Upon purchasing this product you will be personally contacted regarding your ArmadaGPS account.
QUESTIONS? CALL US NOW ON 1800 764 824
Installation Information
Installation instructions will be supplied either on request or after purchase.
Two types of cables are supplied with your order. The Standard Hardwire Installation Cable is suitable for use with our optional Driver ID Module. The OBDII Installation cable is not compatible with our optional Driver ID Module, however, you can add the OBDII + IO Installation Cable to your order if you require both CAN bus and the Driver ID Module.
SAFETY AND ELECTRICAL APPROVALS
The Regulatory Compliance Mark (RCM) indicates that the products are compliant with the Australia and New Zealand radio-communications and Electro Magnetic Compatibility (ENC) standards. These are the standards needed to ensure the safety of products and that they are fit for their intended use, protect the radio spectrum, minimise interference and allow effective use of radiocommunications services.
SPECIFICATIONS:
Network - 4G CAT M1
Size - 92 x 55 x 25mm
Weight - 78g
Waterproof - No
Backup Battery - 3.7V 1250mAh
Operating Voltage - 6 ~ 42V DC
Ignition State Sense - Yes
TRACKbox TB2 with Cable Selection Options - ArmadaGPS Approved Hardware Driver ID and OBDII (CAN bus) options available
Free
The TRACKbox™ TB2 4G CAT M1 is Sensium's premium Vehicle Tracking hardware.
Simply connect to the vehicle OBDII port for a complete installation, or a standard (3 wire) installation (power/earth/ignition sense) to monitor ignition on/off, engine hours, odometer and location.
The TB2 gathers data from your moving vehicle to provide information concerning its location, speed and distance travelled. This makes it an invaluable tool for fleet management and vehicle security. In addition, it can be easily installed and augmented with optional accessories.
Coupled with the ArmadaGPS monitoring service (AU$26.00 per month, per device, one-month minimum term).
Note the TB2 is only functional when paired with the ArmadaGPS monitoring service. Upon purchasing this product you will be personally contacted regarding your ArmadaGPS account.
QUESTIONS? CALL US NOW ON 1800 764 824
Installation Information
Installation instructions will be supplied either on request or after purchase.
Two types of cables are supplied with your order. The Standard Hardwire Installation Cable is suitable for use with our optional Driver ID Module. The OBDII Installation cable is not compatible with our optional Driver ID Module, however, you can add the OBDII + IO Installation Cable to your order if you require both CAN bus and the Driver ID Module.
SAFETY AND ELECTRICAL APPROVALS
The Regulatory Compliance Mark (RCM) indicates that the products are compliant with the Australia and New Zealand radio-communications and Electro Magnetic Compatibility (ENC) standards. These are the standards needed to ensure the safety of products and that they are fit for their intended use, protect the radio spectrum, minimise interference and allow effective use of radiocommunications services.
SPECIFICATIONS:
Network - 4G CAT M1
Size - 92 x 55 x 25mm
Weight - 78g
Waterproof - No
Backup Battery - 3.7V 1250mAh
Operating Voltage - 6 ~ 42V DC
Ignition State Sense - Yes
TRACKbox TB2 - Vylio Combo
$395.00
TRACKbox TB2 Features:
The TRACKbox TB2 will send regular updates to the Vylio platform every 200 metres, letting you know where your vehicle or boat is (as long as there is cell coverage).
Receive email alerts direct to your inbox for the following:- External power loss for your vehicle or boat battery
- Vehicle or boat movement notification
- Alarm activation when connected to a compatible device
- Duress* (Panic) when connected to a compatible device
- Low battery alert for the TRACKbox TB2
About Vylio
This is a no cost, no contract tracking and IoT platform providing real-time device tracking and a 7-day history report for up to 3 devices on one account.
Use Vylio to:
Assist in the recovery of stolen vehicles
Monitor the activities of a learner driver
Know where your family members are in an emergency
Have peace of mind that your precious cargo is safe
And so much more
Vylio Plans:
1-3 devices Free
Up to 10 devices US$10.00 per month
Up to 25 devices US$25.00 per month
TRACKbox TB2 Installation Information
Our TRACKbox TB2 takes less than a minute to install yourself as a basic install which is absolutely fine if you have an internal ledge to tuck the device on, it may take a few cable tidies to get it where you want it and make it safe. We appreciate everyone has different needs for their TRACKbox TB2 so you may prefer to have an auto-electrician hardwire the device for extra security. For marine installation please get in touch with your nearest marine specialist.
The TRACKbox TB2 Specifications:
Network - 4G CAT M1
Size - 92 x 55 x 25mm
Weight - 78g
Waterproof - No
Backup Battery - 3.7V 1250mAh
Operating Voltage - 6 ~ 42V DC
Ignition State Sense - Yes
Internal GPS Antenna
External 4G Cell Antenna
What's included with the TRACKbox TB2?
Included is a 12 Month Data SIM, pre-installed, for use within Australia. Consecutive 12-month data plans will be invoiced at AU$70.00 (for each year)
The TRACKbox TB2 comes with the OBDII installation cable for a fast 'plug & play' installation.
Safety and Electrical Approvals 
The Regulatory Compliance Mark (RCM) indicates that the products are compliant with the Australia and New Zealand radio-communications and Electro Magnetic Compatibility (ENC) standards. These are the standards needed to ensure the safety of products and that they are fit for their intended use, protect the radio spectrum, minimise interference and allow effective use of radiocommunications services.
TRACKbox Driver ID - Track, Train and Improve Driver Behavior
$149.50
TRACK, TRAIN & IMPROVE DRIVER BEHAVIOUR WITH TRACKBOX DRIVER ID
The TRACKbox DRIVER ID Expansion Pack. Know WHAT your vehicles are doing, WHO is doing it and HOW. Buy TRACKbox DRIVER ID today to protect your on-road staff, your vehicles, your equipment and your brand.
EASY INSTALLATION AND SETUP
- Know WHO is Driving, not just WHAT is being driven.
- Track, Train and IMPROVE Driver Behaviour
- with ArmadaGPS TruePath Tracking.
- Protect your Assets. Protect your Drivers.
- Protect your Brand.
- No additional subscription fees!
NOTE: A TRACKbox TB2 is required to be able to use the TRACKbox Driver ID Expansion Pack.
TRACKbox TB3 for Non-Powered Assets (Pre-Order Reservation)
$295.00
TRACKBOX TB3 - THE FUTURE OF NON-POWERED ASSET TRACKING
PRE-ORDER your TRACKbox TB3 today for only $295+GST and SAVE $100 per unit. Click here to learn more about TRACKbox TB3.
MONTHLY SUBSCRIPTION REQUIRED FROM $16 + GST PER MONTH PER UNIT. Please contact us directly for special pricing if you wish to pre-order more than 500 Units.
NEW ARRIVAL! 2000mm OBDII Pass-Through Cable
$29.50
Our 2000mm OBDII Pass-Through Cable allows two products to be easily simultaneously plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network). The OBDII pass-through gives you the ability to connect two products, such as a trackBOX TB2, plus another product such as a diagnostic scan tool.
An additional benefit of an OBDII Pass-Through is visual security, as it may not be as obvious to those inspecting your vehicle with dubious intent to recognise a device is plugged in and active.
NEW ARRIVAL! OBD I/O + Hardwire Installation Cable
$39.50
Our OBDII + IO Installation Cable allows both CAN bus and our Driver ID Module to be connected to your vehicle.
1200mm OBDII Pass-Through Cable
$29.50
Our 1200mm OBDII Pass-Through Cable allows two products to be easily simultaneously plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network). The OBDII pass-through gives you the ability to connect two products, such as a trackBOX TB2, plus another product such as a diagnostic scan tool.
An additional benefit of an OBDII Pass-Through is visual security, as it may not be as obvious to those inspecting your vehicle with dubious intent to recognise a device is plugged in and active.
700mm OBDII Pass-Through Cable
$29.50
Our 700mm OBDII Pass-Through Cable allows two products to be easily simultaneously plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network). The OBDII pass-through gives you the ability to connect two products, such as a trackBOX TB2, plus another product such as a diagnostic scan tool.
An additional benefit of an OBDII Pass-Through is visual security, as it may not be as obvious to those inspecting your vehicle with dubious intent to recognise a device is plugged in and active.
700mm OBDII Non Pass-Through Cable
$29.50
Our 700mm OBDII Non Pass-Through Cable allows the TRACKbox TB2 to be easily plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network).
© 2020 Sensium AUSTRALIA . Sensium Pty Ltd. All prices are shown GST inclusive unless otherwise noted.
